7500 Single Hung Window

HERITAGE DOORS & WINDOWS7500 SINGLE HUNG WINDOW

Traditional good looks with a state-of-the-art weather protection

SPECIFICATIONS

Maximum Size

53-1/8” x 74-1/4”

Maximum Design Pressure

+70 / -100 PSF

Glass Thickness

1/8”, 3/16”, 1/4” monolithic or 1/2” IG

Glass Components

Per Product Approval

Muntin

Profile Exterior/Flat Interior

Frame Color

White, Bronze

Frame Depth

1-7/8”

Miami-Dade County NOA

Reference Below

https://www.lawsonwindows.com/wp-content/uploads/2022/11/MADEinUSA-LawsonS.png
https://www.lawsonwindows.com/wp-content/uploads/2023/03/7700-pc-no-background.jpg

FEATURES & BENEFITS

Block and tackle balance for easy vent removal.

Bottom sill latch eliminates possible accessibility conflict.

Extruded aluminum snap-on glazing bead provides a strong, clean and neat appearance.

Tubular horizontal rails reduce bowing.

Single plane weathering eliminates gaps that permit air leakage.

Fin-seal provides highly efficient weather-stripping.

Recessed jamb installation holes so screw heads won’t interfere with balance travel.

PRODUCT SAMPLE

https://www.lawsonwindows.com/wp-content/uploads/2023/03/7500-1-section-prod-samples.jpg
https://www.lawsonwindows.com/wp-content/uploads/2023/03/7500-2-section-prod-samples.jpg

GENERAL INFORMATION

GENERAL INFORMATION

Single hung window shall be of Series 7500 as manufactured by Lawson Industries, Inc., Medley, Florida, USA, and shall conform to AAMA/NWWDA 101/I.S.2.-97,, H-R70, A.A.M.A. 1302.5-76 for forced entry resistance, and F.B.C.

CONSTRUCTION

All window members shall be of commercial quality 6063 aluminum to T5 and T6 temper. All frame members shall have a minimum dimension of 1-7/8”, cut and fabricated to form a tight butt or telescoped joint. All frame corners shall be joined by two #8 sheet metal screws. Horizontal meeting rails shall be of tubular construction, and attached to verticals with one sheet metal screw per joint. Vent rails shall also be of tubular design, and contain integrally extruded lift rails. Vent sill rail shall be fitted with weathering bulb vinyl to seal sill. Sill shall also contain polypropylene pile with transparent vinyl fin. Each vent rail shall contain two 3” long spring-loaded claw latches that engage with full-length lip to provide positive, secure latching.

FINISH

Exposed aluminum shall be coated with an electro statically applied organic finish meeting the performance requirements of A.A.M.A. 603.5 for pigmented coating. Coating shall have minimum of 1.0 mil dry film thickness in a white or bronze color.

HARDWARE

Sash shall operate on block & tackle, springs and pulley balances, which are concealed from view during vent operation. Sash shall be removed from the interior for glass cleaning when vent is in take-out position only.

MUNTINS

When specified, tubular aluminum exterior muntin and flat interior muntin shall be applied to glass in multitude of standard and custom configurations.

SCREEN

All half screens shall be of rolled aluminum tubular profile, and can be applied from the interior without using tools. Screens shall be held firmly in place by integrally extruded stops in sill and meeting rail. Mesh fabric shall be 18” x 16” dark grey fiberglass. Mesh shall be resplindable with plastic material.

GLAZING

All frame and sash members shall accommodate glass in normal thickness of 1/8”, 3/16”, 1/4” or 1/2” insulated. Glass color shall be as specified.

GLASS

All frame and sash members shall accommodate glass in normal thickness of 1/8”, 3/16”, 1/4” or 1/2” insulated. Glass color shall be as specified.