 |
 |
 |
|

|
|
Maximum Panel Size |
35 3/16 x 93 (Nominal) |
Configurations |
X, XX, OX, OXO, OXXO |
Maximum
Design Pressure |
Per Notice of Acceptance |
Glass Thickness |
3/16 |
Muntin |
Aluminum Profile Exterior and Interior |
Frame
Color |
White,Bronze |
Frame Depth |
4 1/2 |
Miami-Dade County NOA |
Reference Below |
|
|
|
 |

French doors shall be La Porte as manufactured by Lawson Industries, Inc., Medley, Florida, USA, conforming with ANSI/AAMA 101-93 standard, for SWD-RGS/F.E.R., Miami Dade County and F.B.C. |
 |

Extrusion shall be 6063 aluminum in T5 and T6 temper, with walls of from .078 to .125 nominal thickness at all structural locations. Frame jamb shall be tubular shaped. Head, jamb and sill shall have a dimension of 1 3/4 x 4 1/2. Frame shall be assembled by securing head and sill to jambs using eight concealed sheet metal screws. Panels shall be assembled using a 5/16-diameter,
continuously threaded steel rod, running through top and bottom rail from stile to stile. Each rod end shall be held firmly with washered hex nuts. Sill shall have an overall height of 2 and
contain a 1 1/4 step for panel rail to seat. Exterior face of rail shall finish flush with outside edge of sill. Door shall be exterior swing, providing the best possible protection against water infiltration. Frame head shall contain integral hood projecting out from header to deflect clinging water from running directly down head and into opening at top of panel. A double stacked bottom rail shall be
available as an added option.
|
 |

Door panels, jambs and headers shall receive an electrostatically applied organic 1.0 mil thick dry film organic coating which meets the performance requirements of A.A.M.A. 603.5 in a choice of bronze or white. All sills shall be mill finish. |
 |

Active door stile shall be routed for 2 1/8-diameter dead bolt and latch with 2 3/8 backset. Concealed face of inactive leaf shall contain top and bottom flush bolts with stainless steel shaft to engage into header and sill, preventing inactive leaf from opening when bolts are engaged. Two heavy-duty extruded aluminum hinges with stainless steel hinge pin shall support each door leaf. |
 |

Muntins shall be adhesive-applied to interior and exterior surface of each panel and side light. Configuration shall be radiused profile extrusion on both interior and exterior side of unit. |
 |

All stiles and rails shall be weathered using a combination of a flexible virgin PVC bulb and polypropylene pile. Weatherstripping shall be so placed as to provide two points of protection in all vertical locations, and four points of protection in all horizontal locations. |
 |

Panels shall be glazed with 3/16-thick tempered glass as standard. Glass color is as specified. |
 |

Panels shall be glazed with 3/16-thick tempered glass as standard. Glass color is as specified.
|
|
|
|
Sturdy construction is based upon an aluminum wall thickness
that exceeds 1/16” in many areas.
Visually appealing with deep jambs, wide stiles and rails
that convey strength and confidence.
Matching side lights feature horizontal lines that match perfectly
with the door.
Multi-point weathering is a combination of polypile weather-strip
and flexible bulb vinyl.
Unique muntin profiles feature a distinctive design that is
similar in appearance to traditional wood muntin configuration.
Security features include two deadbolts in a concealed face,
on an inactive panel, that resist door from being opened. For two-point locking
see back page.
Standard latch machining with factory-bored holes of 2 1/8”
diameter with 2 3/8” backset permits the use of most latch and
deadbolt hardware by others.
|
|
|