IMPACT DOORS & WINDOWS8700 HURRICANE GUARD^® HORIZONTAL ROLLING WINDOW

The choice for those who want the convenience of a horizontal rolling window plus the strength and protection of HURRICANE GUARD^® technology.

SPECIFICATIONS

Maximum Size

53-1/8” x 63” and 72” x 60”

Configurations

XO, OX, XOX

Maximum Design Pressure

Per Notice of Acceptance

Glass Thickness

5/16” or 11/16” IG

Glass Components

Per Notice of Acceptance

Muntin

Profile Exterior/Flat Interior

Frame Color

White, Bronze

Frame Depth

2-5/8”

Miami-Dade County NOA

Reference Below

FEATURES & BENEFITS

Brass rollers with stainless axle for ease of operation.

Tubular extruded rails reduce bowing of panels.

Removable sill track provides easy cleaning access.

Single plane weathering eliminates gaps that could permit air leakage.

Jamb and vent lock stiles are both weathered to provide the most efficient method of defense against air and water penetration.

Extruded aluminum glazing bead provides a strong, clean and neat appearance.

Gated weep hole protective cover allows water to escape while preventing insects from entering.

Profile aluminum extruded muntin matches the muntins of our other impact products for visual appeal.

Frame depth is 2-5/8” making it a practical depth to match most commonly available buck sizes.

Colonial design featuring profile aluminum muntins on exterior, and flat applied muntin on interior

PRODUCT RESOURCES

Installation Guide

Rough Opening Guide

Pattern Documentation

FL PRODUCT APPROVALS

Download - FL #

Download - NOA

PRODUCT SAMPLE

GENERAL INFORMATION

GENERAL INFORMATION

Rolling window shall be of Series 8700 as manufactured by Lawson Industries, Inc., Medley, Florida USA and shall conform to A.N.S.I./ A.A.M.A.standard 103.3-93, for HSC 43, A.A.M.A. 1302.5-76 for forced entry resistance, and F.B.C. TAS 201, TAS 202 and TASA 203.

CONSTRUCTION

All window members shall be of commercial quality 6063 aluminum hardened to T5 and T6 temper. All frame members shall have a minimum dimension of 2-5/8”, cut and fabricated to form a tight butt or telescoped joint. All frame corners shall be joined by two #10 sheet metal screws. Vertical meeting tails shall be of tubular construction, and attached to horizontals with two sheet metal screws per joint. Vent rails shall also be of tubular design, and contain integrally extruded pull rails. Vent lock rail shall be fitted with weathering bulb vinyl to seal vent to jamb of frame. Weathering at jamb shall also contain polypropylene pile with transparent vinyl fin. Each vent rail shall contain two 3” long spring loaded claw latches that engage with full length jamb lip to provide positive, secure latching.

HARDWARE

Sash shall roll on two .437 diameter brass rollers with stainless steel axles. A removable sill track shall permit easy access to sill mounting holes. Dual gated weep hole baffles shall reduce “blow back” of water resulting from gusting winds. Vents can be removed from interior for glass cleaning, when vent is in the unlocked position only.

FINISH

Exposed aluminum shall be coated with an electro-statically applied organic finish meeting the performance requirements of A.A.M.A. 603.5 for pigmented coating. Coating shall have a minimum of 1.0 mil dry film thickness in a white or bronze color.

MUNTINS

When specified, tubular aluminum extruded muntin and flat aluminum interior muntin shall be applied to glass in multitude of standard and custom configurations.

WEATHERSTRIPPING

Double weather stripping throughout unit shall be water resistant poly-propylene pile, and virgin PVC vinyl.

SCREENS

All half screens shall be of rolled aluminum tubular profile, and can be applied from the interior without using tools. Screens shall be held firmly in place by integrally extruded stops in sill, and meeting rail. Mesh fabric shall be 18” x 16” dark gray fiberglass. Mesh shall be resplindable with plastic material.

GLAZING

All frame and sash members shall accommodate annealed laminated glass in nominal thickness of 5/16”. Glass color shall be as specified. Optional heat-strengthened glass is available upon request. A variety of glazing compounds shall be used to structurally adhere glass in its pocket. A snap fitted aluminum glazing bead containing a compressible vinyl bulb shall be factory applied from the exterior to conceal, and protect the glazing pocket.

GLASS