4200 Designer Window

IMPACT DOORS & WINDOWS4200 HURRICANE GUARD® DESIGNER WINDOW

At last, designer windows in a wide variety of shapes to complement most unique architectural designs, while continuing to meet hurricane impact resistant requirements.

SPECIFICATIONS

Maximum Size

60” x 74” and 36” x 120”

Maximum Design Pressure

Per Notice of Acceptance

Glass Thickness

7/16” or 13/16” IG

Glass Components

Per Product Approval

Muntin

Profile Exterior/Flat Interior

Frame Color

White, Bronze

Frame Depth

2-5/8”

Miami-Dade County NOA

Reference Below

https://www.lawsonwindows.com/wp-content/uploads/2022/11/MADEinUSA-LawsonS.png
https://www.lawsonwindows.com/wp-content/uploads/2022/11/Hurricane-Guard-logo-320x125.png
https://www.lawsonwindows.com/wp-content/uploads/2023/03/4200-pc-no-background.jpg

FEATURES & BENEFITS

Heavy-duty all aluminum construction.

Extruded aluminum glazing bead provides a strong, clean and neat appearance.

Available in a variety of fixed lite designer styles and configurations.

Profile extruded aluminum muntins. Optional stainless steel package available.

Flange type frame for masonry construction or integral fin type frame for wood construction.

Available in Fullview, Brittany, Colonial and Custom Lite styles.

Available in White or Bronze powder coat painted finishes.

Meets or exceeds all Florida building codes for HVHZ hurricane zones.

PRODUCT SAMPLE

https://www.lawsonwindows.com/wp-content/uploads/2023/03/4200-1-section-prod-samples.jpg
https://www.lawsonwindows.com/wp-content/uploads/2023/03/4200-2-section-prod-samples.jpg
https://www.lawsonwindows.com/wp-content/uploads/2023/03/4200-3-section-prod-samples.jpg

GENERAL INFORMATION

GENERAL INFORMATION

Designer windows Series 4200 shall be manufactured by Lawson Industries, Inc., Medley, Florida, USA conforming with A.N.S.I. A.A.M.A. 103.3-93, and F.B.C. TAS 201, TAS 202, and TAS 203. Miami Dade County Florida notice of acceptance, and Florida Building Code (F.B.C.)

CONSTRUCTION

Basic frame sections shall be 2-5/8” extruded aluminum alloy 6063. Corner of main frame shall be coped and to receive its mating extrusion, and joined mechanically by two sheet metal screws. All assembly screw heads and corner joints shall be factory sealed. Glazing material shall be set in bed of wet A.A.M.A. approved glazing compound. Glazing beads of extruded 1/2” x 3/4” x .062” shall be set in glazing compound and exposed sealant tooled to provide smooth minimum radiused seam. Main frame, glazing bead, interior and exterior glazing muntins shall be formed in an infinite combination of bends to meet job requirements. All muntin cross-overs, and end brackets shall be of nylon with homogeneous color of either white or bronze to closely match the color of frame and muntins.

FINISH

Exposed aluminum shall be coated with an electro-statically applied organic finish meeting the performance requirements of A.A.M.A. 603.5 for pigmented coating. Coating shall have minimum of 1.0 mil dry film thickness in a white or bronze color.

GLAZING

All frame members shall accommodate laminated glass in nominal thickness of 7/16”. Glass color shall be as specified. Optional heat-strengthened glass is available upon request. A variety of glazing compounds shall be used to structurally adhere glass in its pocket.

GLASS

All frame members shall accommodate laminated glass in nominal thickness of 7/16”. Glass color shall be as specified. Optional heat-strengthened glass is available upon request. A variety of glazing compounds shall be used to structurally adhere glass in its pocket.